Grind-and-brew problems and fixes from the manuals

Short answer: most grind-and-brew problems come from three things — a damp grinder chute, too much or too-fine coffee in the basket, and parts not seated so a safety switch stops the machine. Unplug before checking anything.

Symptom → cause → fix

SymptomLikely cause (manual)Fix
Grinder runs loud but no coffee comes outMoisture or a foreign object clogging the grinder (Breville Grind Control)Unplug, clear the chute, dry burrs and chute completely (a hair dryer is allowed), restart only when dry
Grounds stick, flow slows over weeksOily or frozen beans leaving residue in the feeder channel (Capresso)Clean the feeder channel; switch beans; see oily bean advice
Filter basket overflowsToo much coffee, grind too fine, or carafe out longer than 20 s during Sneak-a-Cup (BLACK+DECKER)Use less coffee or a coarser grind; return the carafe within 20 s
Water leaks from the machineReservoir filled past the 12-cup MAX, or carafe not placed correctly (BLACK+DECKER)Fill only to MAX; seat the carafe fully
"LOCK BEAN HOPPER" messageHopper not locked, or beans blocking the lock (Breville)Remove beans from the lock area and turn the hopper to lock
"EMPTY COFFEE FILTER" messageFilter basket not seated or door not closed (Breville)Reseat the basket and close the door
"FILL TANK" messageNot enough water (Breville)Fill the tank
Fine sediment in the cupGold-tone filter lets some fines through — normal (Breville)Use a flat-bottom paper filter (8–12 cup, about 3¼ in base)
Coffee too strong / uses lots of beansStrength set high (Breville)Lower the strength setting; check the dose with the ratio calculator
Machine prompts to descaleMineral build-up (De'Longhi TrueBrew)Descale with De'Longhi descaler — steps in the cleaning guide

Cuisinart Grind & Brew owners: cuisinart.com didn't let us read current manuals automatically, so Cuisinart-specific fixes aren't listed. Follow the troubleshooting section of your instruction book.

Prevention beats fixing: the daily routine is in the step-by-step cleaning guide. If clogs keep happening, the problem may be the machine type — the easiest machines to keep clean have fewer grinder parts, and a separate grinder avoids steam near the burrs altogether.