Which coffee beans work best in a grind-and-brew machine

Short answer: use fresh, whole, medium to medium-dark roasted beans that look dry or only slightly glossy. Avoid very oily dark roasts, flavored or coated beans, and beans straight from the freezer — they're the main causes of clogged grinder chutes.

Where a grind-and-brew can clogBeans move from hopper to burrs, then through the chute to the wet filter basket. Oil coats the burrs and moisture makes grounds stick in the chute.hopperburrschutewet filter basketoily / coated beansoil + finesmoisture → sticking
Illustrative bean path. Layouts differ; use your model's manual before opening or brushing any part of the grinder.

What the manuals say

Grind setting by roast

BeanStart atNotes
Light roast, dry surfacemiddle to one step finerfewest problems in grinders
Medium / medium-darkmiddle of the drip rangethe safest everyday choice
Dark, oilycoarserCapresso's GS manual says darker and oilier beans need coarser settings; clean the chute more often
Flavored / coateddon't usegrind them elsewhere or buy pre-ground and use grind-off

Blade grinders don't have settings, so on those the bean itself matters even more — see burr vs blade. If you already have a clog, the fix is in the troubleshooting table and the cleaning routines. Dose matters too: weigh it with the coffee ratio calculator.

FAQ

Will oily coffee beans clog a grinder?
They can. Oil from dark, shiny beans coats the burrs and the chute, and grounds start to stick and slow down. Capresso's manuals say dark, oily beans leave residue in the feeder channel and recommend cleaning it more often.
Can I use beans straight from the freezer?
Capresso advises against it: frozen beans pick up moisture that seeps into the burrs and makes ground coffee stick in the feeder channel. Take them out the day before.